[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
(usagi-users 02695) Re: need to check the MTU option which is contained by a Router Advertisement
- To: kago@xxxxxxxxxxxxxx
- Subject: (usagi-users 02695) Re: need to check the MTU option which is contained by a Router Advertisement
- From: YOSHIFUJI Hideaki / 吉藤英明 <yoshfuji@xxxxxxxxxxxxxx>
- Date: Fri, 12 Dec 2003 23:21:35 +0900 (JST)
- Cc: usagi-users@xxxxxxxxxxxxxx
- In-reply-to: <3FD9C741.6050905@jp.fujitsu.com>
- Organization: USAGI Project
- References: <3FD9C741.6050905@jp.fujitsu.com>
- Reply-to: usagi-users@xxxxxxxxxxxxxx
- Sender: "Hideaki YOSHIFUJI" <yoshfuji@xxxxxxxxxxxxxxxxxxxxxxxxx>
In article <3FD9C741.6050905@xxxxxxxxxxxxxx> (at Fri, 12 Dec 2003 22:48:49 +0900), Hiroaki Kago <kago@xxxxxxxxxxxxxx> says:
> Although the following is specified in RFC2461 as conditions which
> should be fulfilled in order to update an MTU value at the time of
> the IPv6 Router Advertisement message reception with the MTU option,
> in the USAGI snap kernel-2.6-s20031208, it has updated unconditionally.
>
> 1. the MTU value is greater than or equal to the minimum link MTU(1280Bytes)
> 2. the MTU value does not exceed the default LinkMTU value
Applied. Thank you.
--yoshfuji